Introduction; Use Of Symbols And Highlighting; Warranty And Liability - Houghton Webasto Cool Top Trail 20 Operating And Installation Instructions

1

Introduction

These operating - and installation instructions are part of the
product and contain all the information required to ensure cor-
rect and safe installation and use.
u
Read these instructions before installing and operating the
unit.
u Keep these instructions ready to hand.
u Hand these instructions on to the following owner or user
of the unit.
1.1

Use of symbols and highlighting

DANGER
This signal word denotes a hazard with a high degree
of risk which, if not avoided, may lead to death or seri-
ous injury.
WARNING
This signal word denotes a hazard with a moderate
degree of risk which, if not avoided, may lead to minor
or moderate injury.
CAUTION
This signal word denotes a hazard with a low degree of
risk which, if not avoided, may lead to minor or moder-
ate injury.
NOTE
This symbol denotes a special technical feature or (if not
observed) potential damage to the product.
This symbol refers to separate documents which may be
enclosed or can be requested from Webasto.
ü Requirements for the following necessary action
1.2

Warranty and liability

The statutory warranty period applies. If the product is defect-
ive, please contact a Webasto service partner in your country.
You can find your nearest dealer at:
https://dealerlocator.webasto.com/en-int
Our experts will be happy to help you and will discuss the war-
ranty process with you in more detail.
Webasto shall not assume liability for defects or damages that
are the result of disregarding the installation and operating in-
structions. This liability exclusion particularly applies to:
l Installation by untrained personnel.
l Improper use.
l Repairs not carried out by a Webasto service workshop.
l Use of non-genuine parts.
l Conversion of the unit without permission from Webasto.
l Mechanical damage to the equipment.
l Non-compliance with installation and operating instruc-
tions.
l Non-compliance with inspection and maintenance instruc-
tions.
l Operation with voltage levels other than specified in the
technical data.
l Damage to the remote control resulting from leaking bat-
teries.
l Damage resulting from contact with unsuitable substances,
such as chemical products and unsuitable cleaning agents.
l Damage caused by abnormal environmental or unsuitable
operating conditions.
l Damage resulting from improper transport.
9039408E_OI-II_Cool Top Trail 20-24
Introduction | 1
3 / 155