Rittal air duct Blue e+
Fig. 8:
Mount the rear angle bracket
Remove the horizontal air duct part (fully retracted in its supplied state, see
fig. 9) from the packaging.
Fig. 9:
Horizontal air duct part in its supplied state
Then locate the air duct at the front of the rack by aligning the keyholes with
the previously inserted screws (fig. 5 and fig. 6).
Fig. 10:
Locate the air duct at the front
Extend the air duct at the rear until the tabs on the central air duct section have
passed the rear 482.6 mm (19") mounting angles.
Then fold the tabs over by hand at right angles (fig. 11).
5 Installing the air duct
EN
21