Cross flow fans are suited to a wide range of applications due to their slim construction Rittal GmbH & Co. KG wishes to point out that, design. They stand out against other fans based on the directive (EU) no. 327/2011 of the...
Mounting circuited since there danger magnetization. Mounting • Do not touch the connection ends of the motor when it has been switched off and is Mounting, electrical connection and commissioning coming to a stop – Electrical shock due to are only to be performed by trained service the effect of the generator.
Maintenance, repair professionally connected and operating Maintenance, repair properly. Connection data complies with Wear safety shoes and gloves for handling! specifications on the type plate. • Due to the selection of bearings with "lifetime • Start-up: lubrication" (special grease), the cross flow fan Switch fan on in accordance with switched maintenance-free.
Disposal / recycling • Do not use any aggressive, paint solvent cleaning agents when cleaning. • Never use a high-pressure cleaner or water- spray for cleaning - particularly when the ventilator is running. • If water enters the motor: Dry off the motor winding before using it again.