Page 1
Fan-and-filter unit 3237.xxx 3241.xxx 3238.xxx 3243.xxx 3239.xxx 3244.xxx 3240.xxx 3245.xxx Assembly and operating instructions...
Page 2
Preface Preface Dear Customer! Thank you for choosing a fan-and-filter unit from Rittal. Yours Rittal GmbH & Co. KG Rittal GmbH & Co. KG Auf dem Stützelberg 35745 Herborn Germany Phone: +49(0)2772 505-0 Fax: +49(0)2772 505-2319 E-mail: info@rittal.com www.rittal.com www.rittal.de We are always happy to answer any technical ques- tions regarding our entire range of products.
– The louvres must always have their opening pointing The fan-and-filter unit is comprised of the following four downwards. main components: Fan motor, filter box, louvred grille – Use only original spare parts and accessories. with function logo and filter medium. Rittal fan-and-filter unit assembly and operating instructions...
Assembly and connections Scope of supply 3.1.2 Control Rittal fan-and-filter units may be controlled more effi- The fan is supplied in a packaging unit in a fully assem- ciently using a thermostat (Model No. 3110.000), digital bled state and ready to connect.
– Make sure that the clips have snapped into place supply company. Electrical connection must only be properly to guarantee secure mounting. Rittal fan-and-filter unit assembly and operating instructions...
For technical data, refer to the rating plate. ◾ Remove the red cover from the electrical connection. Fig. 4: Release the bayonet connection Units 3240.xxx, 3241.xxx, 3243.xxx to 3245.xxx are released by pressing the release button of the bayonet Rittal fan-and-filter unit assembly and operating instructions...
The direction of airflow blows into the enclosure from Replacing the fleece filter the outside as standard. ◾ First press the catch of the louvred grill (Rittal logo) Should it become necessary to change the direc- up slightly with one finger (see fig. 6).
Inspection and maintenance Replacing the pleated filter ◾ First press the catch of the louvred grill (Rittal logo) up slightly with one finger (see fig. 6). ◾ Once it is released, the louvred grille can be dropped open by approx. 70° or 90°.
Storage and disposal Caution! Risk of damage! The fan unit must not be stored at tem- peratures above +70 °C or below -30 °C. Disposal can be performed at the Rittal plant. Please contact us for advice. Rittal fan-and-filter unit assembly and operating instructions...
Storage temperature °C -30…+70 IP 54 standard Protection category (to IP 54 standard IP 55 with pleated filter IEC 60 529) IP 56 with hose-proof hood IP 56 with hose-proof hood Tab. 3: Technical specifications Technical modifications reserved. Rittal fan-and-filter unit assembly and operating instructions...
Page 12
(A) 46/49 Operating temperature °C -15…+55 Storage temperature °C -30…+70 IP 54 standard Protection category (to IP 55 with pleated filter IEC 60 529) IP 56 with hose-proof hood Tab. 4: Technical specifications Technical modifications reserved. Rittal fan-and-filter unit assembly and operating instructions...
Page 13
51/46 54/56 Operating temperature °C -30…+55 Storage temperature °C -30…+70 IP 54 standard Protection category (to IP 55 with pleated filter IEC 60 529) IP 56 with hose-proof hood Tab. 5: Technical specifications Technical modifications reserved. Rittal fan-and-filter unit assembly and operating instructions...
Page 14
-30…+70 IP 51 standard IP 54 standard Protection category (to IP 52 with pleated filter IP 55 with pleated filter IEC 60 529) IP 56 with hose-proof IP 56 with hose-proof hood hood Tab. 6: Technical specifications Technical modifications reserved. Rittal fan-and-filter unit assembly and operating instructions...
Next, the four contact foils should be stuck on all- round between the fan-and-filter unit and the inside of the enclosure as shown in the following illustration. Fig. 11: Drilling pattern Rittal fan-and-filter unit assembly and operating instructions...
Accessories Note: EMC protection can only be guaranteed when using original Rittal EMC filter me- dia (Model Nos. 3237.066, 3238.066, 3239.066, 3240.066, 3243.066). Fig. 12: EMC contact foils Accessories EMC filter mat Filter class in accordance In accordance with To fit Model No.
Page 17
NEMA 4, NEMA 4X NEMA 1, NEMA 12, NEMA 3, NEMA 3R, 3242.xxx/3244.xxx 350 x 480 x 110 1 pc(s). 3243.080 NEMA 4, NEMA 4X 3245.xxx 350 x 480 x 160 NEMA 1, NEMA 12, NEMA 3, NEMA 3R 1 pc(s). 3245.080 Tab. 14: Hose-proof hoods Rittal fan-and-filter unit assembly and operating instructions...
3244.100/.110/.600 3245.508/.518 3239.100/.110/.600 3243.108/.118 3237.108/.118 3244.108/.118 Details, see page 19 3238.108/.118 3239.108/.118 24 V DC – N PE L2 L3 PE 3240.100/.110/.600 3244.140 3237.124 3241.100/.110/.600 3238.124 3240.108/.118 3239.124 3241.108/.118 3240.124 3241.124 Fig. 13: Connection diagrams Rittal fan-and-filter unit assembly and operating instructions...
Page 19
Control input 0…10 V or PWM, galvanically isolated, impedance 100 kΩ +10 V Voltage output 10 V max. 1.1 mA, galvanically isolated, not short circuit-protected Speed Speed output Open Collector, 1 pulse per revolution, galvanically isolated Tab. 15: Explanations to fig. 14 Rittal fan-and-filter unit assembly and operating instructions...
Declaration of conformity Declaration of conformity Rittal fan-and-filter unit assembly and operating instructions...
Page 21
Notes Rittal fan-and-filter unit assembly and operating instructions...
Page 22
Notes Rittal fan-and-filter unit assembly and operating instructions...
Page 23
Notes Rittal fan-and-filter unit assembly and operating instructions...
Page 24
◾ Climate Control ◾ IT Infrastructure ◾ Software & Services You can find the contact details of all Rittal companies throughout the world here. www.rittal.com/contact RITTAL GmbH & Co. KG Auf dem Stuetzelberg · 35745 Herborn · Germany Phone +49 2772 505-0...