Accessories; Before Installing The Ice Maker; Installing The Handle - EdgeStar IB121SS Owner's Manual

Accessories

Ice Scoop Ice Bucket
Ice Scoop

Before Installing the Ice Maker

Before using your ice maker, remove the exterior and interior packaging and check to make sure your have the following
accessories:
• Ice scoop
• Ice bucket
• Quick fitting (for connecting water supply)
• Handle
• Four (4) tapping screws
• Instruction manual.
CAUTION: Before connecting the ice maker to the power source, let it stand upright for
!
approximately four (4) hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Clean the interior surfaces with lukewarm water and a soft cloth.

Installing the Handle

To install the handle:
1. Decide how you want the door to swing. If you
want to reverse the door swing, see "Reversing
the Door Swing." If not, install the door handle.
2. Align the handle with the screw holes on the door.
3. Use a Phillips screwdriver to attach the handle to
the door with the four (4) tapping screws.
Ice Bucket
Quick Fitting
Quick Fitting
Internal Thread
Internal Thread
(7/16"-24UNS) 7/16"-24UNS
Handle Tapping
Handle Tapping
Screw
Screw
6