Table of Contents
Advertisement
Leg Adjustment
Level your ice maker by adjusting the legs at the front of the ice maker.
• Turn clockwise to raise
• Turn counter clockwise to lower.
Electrical Connection
This ice maker should be properly grounded for your safety. The power cord of this ice maker is equipped with a three-
prong plug which mates with standard three-prong wall outlets to minimize the possibility of electrical shock.
• Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
• Do not use an extension cord to connect power to the unit.
• Do not use a two-prong grounding adapter.
• If you only have a two-prong wall receptacle, contact a qualified electrician to have it replaced with a three-prong
receptacle in accordance with applicable electrical codes.
• This ice maker requires a standard 115 volts A.C. 60hz electrical outlet with a three-prong Ground.
• The cord should be secured behind the ice maker and not left exposed or loose.
Extension Cord
Because of potential safety hazards, this appliance is not recommended for use with an extension cord. However, if you
must use an extension cord, use only a UL-Listed, three-wire grounding type appliance extension cord with a grounding
type plug and outlet. The electrical rating of the cord must be 115 volts and at least 10 amps.
Connecting The Water Supply
All the necessary hardware is not provided (as the plumbing fixtures at the installation point may differ) for installation,
so it is necessary to hire a professional licensed plumber to complete the installation.
• Connect the water supply tube to the nearest cold water source. Connect sufficient tubing to the unit to allow the
appliance to be moved freely for cleaning and service. Also make sure that the tubing is not pinched or damaged during
transportation/installation.
• Wipe out the inside of the unit and the ice bucket with a damp cloth.
WARNING: Connect to potable water supply only.
!
9
Down
Up
Advertisement
Table of Contents
