Table of Contents
Advertisement
3 Product Description
3.1
General
The TES201 is a room sensor for temperature T in demand controlled ventilation and building automation. It is
designed for indoor wall mounting in residential and commercial applications.
Depending on the target market, the sensor is available with an EU or US enclosure. For dimensions, please refer
to chapter 3.2 Dimensions.
The electronics of TES201 is located in the front cover, which can be easily snapped on/off once the back cover
is fixed onto the wall and wired. The back cover contains just the push-in terminals. No tools are needed for
mounting or changing the active part.
T can also be read on the optional display. Please refer to chapter 3.4 Display.
The measured data is available on two types of output:
The analogue versions deliver the measurands according to the ordering code. Model, measurement units
(metric or non-metric) and output scaling can not be changed by the customer.
The versions with digital interface supply all available quantities. For further information, please refer to chapter
5.2.5. Modbus Register Map and chapter 8 Technical Data. By means of a jumper, the RS485 termination resistor
can be set on or off. For BACnet, please see the PICS ( Product Implementation Conformance Statement), which
is available at
www.epluse.com/tes201
For a setup deviating from default, the digital TES201 can be configured manually with the free PCS10 Product
Configuration Software and an optional configuration adapter. Refer to chapter 5 Setup and Configuration for
details.
Front cover
.
User Manual TES201
Back cover
Room Sensor for Temperature | 6
Advertisement
Table of Contents
