0-10 V
3.4
Display
The optional display shows the measured T value and the measurement unit according to ordering code.
4 Mounting and Installation
As the room sensor is generally mounted onto a conduit box, for accurate measurement results it is important
to tighten the conduit box for avoiding false air ingress (along the electrical tubes inside the wall) into the room
sensor enclosure.
PLEASE NOTE
In order to protect the front cover and the electronics from typical construction site pollution (such as painting
of the walls) the front cover should be snapped on only after the construction works are completed.
Please mind the following rules of thumb for sensor positioning:
▪
Mount the Sensor 2 m (6.6 ft) away from outlets and intakes
▪
Mount the Sensor at a height of 1.5 m (5 ft) (half of room height)
▪
Avoid direct sunlight from window
▪
Avoid restricted airflow
▪
Avoid close proximity to heat sources
▪
Avoid heat accumulation
▪
Avoid draught
TES201 current output
TES201 digital interface
N.C.
Connection on the electronics board
Connection on the electronics board
Connection assignment appropriate for daisy-chain wiring
Connection assignment appropriate for daisy-chain wiring
15 - 35 V DC
N.C.
24 V AC ±20 %
User Manual TES201
Connection scheme
15 - 35 V DC
15 - 35 V DC
N.C.
Connection scheme
15 - 35 V DC
24 V AC ±20 %
15 - 35 V DC
24 V AC ±20 %
Room Sensor for Temperature | 8