Table of Contents
Advertisement
How to use the Bark Boss Collar
Even at low levels, dogs may yelp when stimulation is introduced
due to surprise or startles they receive, not because it is hurting
them. Do not rush up and pet or hug the dog because the dog will
misunderstand . When you do this, the dog will learn that every
time they feel the tingle, they just have to yelp and the tingle will
stop, and you will hug and pet them. With the Bark BOSS, the dog
will hear a beeping TONE each time the collar senses the dog's
vocal cord vibrations. The TONE will be closely followed by a
mild e-Stimulation. This stimulation is similar to what you feel
with static electricity. This static stimulation is the negative
response that the dog will associate with the problem barking.
When used properly, low level stimulation training is more hu-
mane, effective and a better way to train your dog.
Here's How it Works:
1.
Put the collar on the dog (collar adjusts from 7" to 27").
2.
Adjust the easy clip buckle collar so that the collar is snug
around the dog's neck.
3.
Turn the easy turn dial to the needed level (from 1 to 8) or
"T" for beeping Tone only.
4.
Stimulation level will depend on size and temperament of
the dog (test light included).
5.
The middle (black) post on the collar senses the vibration
from the dog's vocal cords.
6.
It WILL NOT activate from loud noises or other dog's
barking, only from your dog's barking.
7.
The sensor picks up the barking vibration and activates
the beeping Tone, followed by the e-Stim.
8.
This gets the dog's attention and they begin to associate
this with the barking, so they stop the unwanted barking.
Problem solved!
5
Advertisement
Table of Contents
