Table of Contents
Advertisement
·
NOTE: The bottom of the charging unit has a storage compart-
ment that will NOT charge a battery.
How to Test Your Collar
When rubbing the serrated edge of the test light across the
sensor, do not press down hard. Instead, run the tester all the
way from one end to the other with a quick motion using a very
light amount of downward pressure. Do not be discouraged if it
takes a few tries to get the hang of it.
A) Place the contact terminals of
the test lamp firmly onto the
electrodes of the receiver.
B) Set the stimulation to level 5 or
6.
C) Use the serrated edge of the test
light and gently rub it across the
sensor. (black plastic center
post).
D) The light on the test light
should light up and will be
brighter on higher levels.
NOTE
9
Advertisement
Table of Contents
