KTM 125 SX 2023 Owner's Manual page 55

–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
F03764-10
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S05334-10
–
Tighten screw
Guideline
Screw, top steering
head
S05335-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
S05335-11
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Secure the wiring harness with cable holder on the left. Mount
and tighten screw
S05334-11
SERVICE WORK ON THE CHASSIS 11
3
of the right fork leg is positioned to
of the left fork leg faces the front.
4
.
M8 12 Nm (8.9 lbf ft)
2
.
M20x1.5 12 Nm (8.9 lbf ft)
5
.
M8 20 Nm (14.8 lbf ft)
6 .
M8 17 Nm (12.5 lbf ft)
7
.
Loctite ® 243™
53