KTM 125 SX 2023 Owner's Manual page 49

Adjusting the handlebar position with the handlebar clamp
–
Place the handlebar support in the required position.
Info
The handlebar support is longer and higher on one
side.
–
Mount and tighten the screws
Guideline
Screw, handle-
bar support
Rigid handlebar support bushing (A46001038010)
The conical side of bushing faces downwards.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
A01170-10
–
Position handlebar clamp
–
Mount screws
–
First bolt the handlebar clamp with screws
longer, higher side of the handlebar supports so that both
parts touch.
–
Tighten screws
Guideline
Screw, handlebar
clamp
Finishing work
–
Mount the handlebar cushion.
TUNING THE CHASSIS 10
7
with the bushings
M10 40 Nm (29.5 lbf ft)
2
.
1
, but do not tighten yet.
1
evenly.
M8 20 Nm
(14.8 lbf ft)
8
.
Loctite ® 243™
1
onto the
47