Advertisement
3.7
Checking the throttle cable routing
Warning
Danger of accidents The throttle cable can become kinked, trapped or blocked if it is not routed cor-
rectly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
–
Attach fuel tank breather hose
–
Plug in fuel pump connector
I00437-10
Finishing work
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank. (
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars, above the fuel tank roller on the
right of the frame to the throttle valve body. Both throttle
cables must be secured behind the rubber strap of the fuel
tank support.
»
If the throttle cable routing is not as specified:
–
Correct the throttle cable routing.
I00443-02
Finishing work
–
Install the fuel tank. (
–
Mount the seat. (
4
.
5
.
p. 17)
p. 16)
p. 17)
p. 19)
p. 17)
WORK 3
21
Advertisement
