3 WORK
20
–
Position the fuel tank and fit the two spoilers to the sides in
front of the radiator bracket.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
I00434-10
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
(150 EXC EU)
–
Position the horn with the horn bracket.
S05360-11
–
Mount and tighten screws
Guideline
Screw, fuel tank
spoiler on radiator
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
I00436-10
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Lubricate the O-ring and join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
1
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
2
with the collar bushings.
M6
6 Nm (4.4 lbf ft)
p. 38)
3
.
3
.