Advertisement
WRAPAROUND FRONT STRAIGHT (Stainless Steel)
3. Keep the wrap arms tied back in their shipping position.
4. Use a portable hoist to lift the wrap frame off the shipping pallet.
5. Carefully stand up the wrap frame. Support this frame to keep it in the upright
position.
6. Carefully lift the structure (approximately 90") with a portable hoist or fork truck
high enough to attach the two main support legs.
7. Attach the Straight Leg and Brace to the passenger side frame as shown in the
diagram below.
SUPPORT
LEG IS NOT
VISIBLE
8. Attach the small support leg to the driver side leg.
9. Attach the two gusset supports between the legs and the upper frame.
PECO Corporation – 244 Rex Boulevard – Auburn Hills – Michigan – 48326 – USA – 1-248-299-5800
07/14/23
S:\Engineering Doc's\Manuals & Packing Lists Combined\WRAP WASHERS\997206 WA721FSs_V2.doc
GUSSET
www.PECOCARWASH.com
GUSSET
FRONT
STRAIGHT
LEG AND
BRACE
997206AY53
Page 6 of 33
Advertisement
