Husqvarna TC 112 Operator's Manual page 23

Maintenance schedule
Engine Examine the fuel hose for wear and damage. Re-
place the fuel hose if it is necessary.
Replace the fuel filter.
Clean the air filter.
Replace the air filter.
Examine the muffler and the heat deflector.
Do a check of the engine oil level. Fill with engine
oil if it is necessary.
Replace the engine oil.
Replace the engine oil filter.
Replace the spark plug.
Do a check of the engine speed. Adjust the engine
speed if it is necessary.
Transmission, con- Examine the transmission cooling fan.
trols and drive sys-
Remove the wheels and lubricate the axles.
tem
Make sure that the product does not move when
the pedals are in the neutral position.
Do a check of the forward and rearward drive at
different speeds.
Do a check of the switch for the blade engagement
control.
Do a check of the switch for the cutting height lever.
Do a check of the switches for the forward pedal
and rearward pedal.
Do a check of the parking brake.
Do a check of the operator presence control (OPC).
Cutting equipment Clean the cutting deck, below the belt covers and
below the cutting deck.
Do a check of the parallelism of the cutting deck.
Adjust the cutting deck if it is necessary.
Examine the cutting deck belt for wear and dam-
age.
Examine the blades for wear and damage. Sharpen
or replace the blades if it is necessary.
Do a check of the blade brakes (if equipped).
Examine the grass catcher and the switches for the
grass catcher (TC models only).
1903 - 004 - 18.12.2023
Before each use/ Every 50 h or an-
weekly nually
X
X
X
X
X
X
O
X
X
X
X
X
X
O
X
O
X
O
X
X
X
X
X
O
X
O
X
23