Husqvarna TC 112 Operator's Manual page 16

3. Attach the rubber tube elements to the front frame.
4. Put the grass catcher handle down through the grass
catcher cover and the holes in the grass catcher
frame.
I
5. Install the screw (H) and the nut (I) in the tube of the
grass catcher handle.
6. Install the end plug (J) to the tube of the grass
catcher handle.
16
H
J
To install and remove the grass catcher
1. Tilt the grass catcher and put it on the 2 brackets.
2. Release the grass catcher and let it move into
position. Make sure that the latches in the bottom
lock the bottom part of the grass catcher in position.
3. To remove the grass catcher, move the grass
catcher handle until the latches release the bottom
of the grass catcher. Lift the grass catcher from the
brackets.
To install the anti-scalp wheels
Assembly overview on page 13 for the correct
Refer to
fasteners for this task.
• Install the anti-scalp wheel (A), the bushing (B), the
washer (C), the bolt (D), and the nut (E) in 1 of the 3
holes.
A
C
D
To connect the battery
WARNING:
Make sure that the ignition switch is in
E
B
Risk of electric shock.
1903 - 004 - 18.12.2023