Husqvarna TC 112 Operator's Manual page 19

The lever to engage or disengage the drive system is
found behind the right rear wheel.
• Push the lever in fully to engage the drive system.
• Pull the lever out fully to disengage the drive system.
To apply and release the parking brake
• To apply the parking brake, do the steps that follow.
a) Push down the parking brake pedal (A) fully and
pull up the parking brake lock (B).
b) Release the parking brake pedal.
• To release the parking brake, push down on the
parking brake pedal and release it.
To engage and disengage the cutting
deck (TC 112)
WARNING:
deck without a grass catcher or other
accessory installed to the grass discharge.
1903 - 004 - 18.12.2023
A
Do not operate the cutting
• Move the blade engagement control to the engaged
position (A) to engage the cutting deck.
• Move the blade engagement control to the
disengaged position (B) to disengage the cutting
deck.
To engage and disengage the cutting
deck (TC 114)
WARNING:
deck without a grass catcher or other
accessory installed to the grass discharge.
• Pull out the PTO button to engage the cutting deck.
B
• Push in the PTO button to disengage the cutting
deck.
A
B
A
Do not operate the cutting
B
19