Cleaning And Maintenance - cecotec Cumbia CREMMAET MACCHIA BLACK Instruction Manual

Super-automatic coffee machine

Table of Contents

Available languages

ENGLISH

The machine will enter standby mode if no operation is performed for 28 minutes. All

indicator lights will turn off and all functions will be disabled during standby mode.

Adjusting the amount of coffee

After coffee starts being dispensed, press, and hold the icon of the coffee type you have

selected for 2 seconds; then, the buzzer will beep, and the corresponding coffee indicator

light will flash. Finally, the machine will enter the setting for the amount of coffee dispensed.

As soon as the coffee in the cup reaches the desired level, release the coffee type icon so that

the machine stops operating. The set amount of coffee will be saved. The amount of coffee

dispensed according to the type of coffee is:

(1) Single espresso: 30-100 ml

(2) Double espresso: (30-100 ml) *2

(3) Americano: 220-180 ml

Reset function

Press and hold the single and the double Espresso icons for two seconds. Then, all settings

will go back to factory default settings.

4. CLEANING AND MAINTENANCE

WARNING: make sure to unplug the coffee machine and allow it to cool down completely

before cleaning it. To prevent electric shocks, do not immerse the cord, plug or main body in

water or any other liquid. Unplug the device after every use.

Wipe the outer surface of the product with a soft, damp cloth to remove stains, but

avoid using abrasive cleaning tools, which will scratch the product. Do not use cleaners

containing alcohol or solvents.

Water droplets may accumulate in the area above the drip tray grid or on the worktop

during preparation. To control dripping, wipe the area with a clean, dry cloth after each

use of the product.

The water tank, drip tray, drip tray grid, inner drip tray, waste tank and panel are not

dishwasher safe.

The water in the grid and drip tray, as well as the coffee grounds in the inner drip tray and

the waste tank, must be emptied and cleaned thoroughly.

Clean the parts according to the description and operation below.

Table of Contents