cecotec Cumbia CREMMAET MACCHIA BLACK Instruction Manual page 51

NOTE: the warning indicator light will light up and remain steady if the brewing unit is not
installed in the correct position.
Close the panel and check that the panel and the machine body are in the same horizontal
-
plane.
NOTE: the warning indicator light will flash if the panel is not properly closed.
5. Inner drip tray and waste tank
Open the panel and check if the drip tray and the waste tank are installed in place.
NOTE: the inner drip tray is not correctly installed in position if the warning indicator light is
flashing. The machine will not operate if there are any foreign objects in the front part of the
waste tank.
6. Drip tray grid
Place the drip tray grid in the drip tray. The drip tray grid must be installed properly so
-
that a coffee cup can be placed on it.
Put the drip tray into the appliance.
-
NOTE: the drip tray collects the water from the spout during each rinsing and self-cleaning as
well as any coffee that may spill during preparation. Empty and clean the drip tray daily.
7. Coffee bean tank
Fill the coffee bean tank with the appropriate amount of fresh beans, maximum 200 g, then
close the coffee bean tank cover.
WARNING: if the grinding blade has previously been removed, make sure that it is correctly
installed when it is replaced before filling the coffee bean tank. Otherwise, you will have to
empty it because it will be difficult to install.
Coffee machine operation
This is a multifunctional coffee machine, it has the functions "Single Espresso", "Double
Espresso", "Americano", "Manual Cleaning" and "Coffee Bean Emptying", as you can see on the
control panel.
SPECIAL NOTE: the product will automatically perform cleaning to prepare for operation each
time it is started.
NOTE: coffee will come out drop by drop at the beginning (2-3 seconds after starting) and at
the end (6-8 seconds before the end), this is normal operation.
CREMMAET MACCHIA BLACK _ BLACK ROSE _ WHITE _ WHITE ROSE
ENGLISH
51