Friedrich FPHMR18A3A Service Manual page 71

Lh
The following is a deep cleaning and must be completed by a professional.
Lh
Usera are strictly forbidden
0
Cut off the power supply by moving the power switch In the dlnictlon
of the arrow.
Note: Tum off the appllanoe first before cutting off the power suppl y .
1. Ramova the wiring COV&r and the elactrlc■I box cover.
•
2. Disconnect tha fan motor line and the louver motor line.
• 1. Open the screw covers and remove the screws
rafltr to Flg.414 of INDOOR UNrr INSTALLATION.
2. Open tha Hmlt axn.
3. Remove the front shall for
Note: Pay attention to the llmlt of F position, some
models have two places.
Note: when you want to dean the front shell with
clean water, you must first remove all the motors on
the front shell.
ft
V
Remove the screws of tha air
(G position and H position)
Note: Some models do not have H position screws.
71
MAINTENANCE
to
operate privately, otherwise they will be at their own risk.
wiring COYer
electrical box cover
clean
Ing.
limit axis
duct
Fan motor llne
s
7
I :· ZP
Front shell
G