Advertisement
3. Using Your Camera
3.4 Self Timer Mode
In Self Timer mode, the camcorder will take a single picture after a set
amount of time has elapsed with each press of the SHUTTER button.
To enter Self Timer mode, power the camera on and press and hold the
MODE button. Use the LEFT or RIGHT buttons to select Self Timer and
press the OK button to enter the Self Timer Mode.
1. Line up your shot by looking at the LCD screen to see what is in the shot.
2. Hold the camera steady and press the SHUTTER button to start the timer,
at the end of the countdown, a single photo will be captured.
3. The number of photos that can be captured at a particular resolution will
be displayed in the top right corner of the screen.
4. The number of photos that can be captured will be displayed as 0 on the
screen if there is no memory card inserted in the camera's memory card
slot.
5. The number of remaining photos is determined by the selected photo
resolution. The higher the photo resolution, the lower the number of
photos you are able to be save to the memory card. Before capturing any
photos, you can select a preferred photo resolution.
3.4.1 Photo Size
This function sets the photo resolution. The higher the resolution, the greater
the photo quality and the larger the file size of the photo.
1. In Self Timer Mode press the MENU button.
2. Select 'Photo Size' using the UP or DOWN buttons and press the OK
button to enter the 'Photo Size' menu.
3. Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (56MP, 48MP, 36MP, 24MP,
20MP, 16MP, 12MP, 8MP, 5MP).
4. Press the MODE button to exit the settings menu without making a
selection.
3.4.2 Timer Duration
This function determines the time delay before a photograph is captured.
This setting can be used by photographers to take photographs of
24
Advertisement
