Technical Parameters - Ebyte NE2-S1 Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

3.2Technical Parameters

Item
Operating Voltage
Working current
encapsulation
Operating mode
Socket connection
Network protocol
IP acquisition
method
DNS domain name
resolution
Domain name
resolution server
Configuration
method
IP address
username
password
local port
subnet mask
gateway
Serial buffer
Packaging
mechanism
Serial port baud
rate
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
DC 3.1~6 V ( VCC1 )
If the power supply is 5.0V, the VCC pin must be used, and the
load capacity of the 5.0V power supply is recommended to be
above 300mA.
DC 3.0~3.6V (VCC2)
If the power supply is 3.3V, it is recommended to use the
VCC2 pin (it is not recommended to connect the VCC 1 pin)
and the load capacity of the 3.3V power supply is
recommended to be above 300mA.
Only one of the two power supply methods can be selected,
and remember not to supply power at the same time.
Peak value: 180mA@5V(VCC1); 170mA@3.3V(VCC2)
Standby: 50mA@5V(VCC1); 40mA@3.3V(VCC2)
1.27mm stamp hole
TCP Server (default), TCP Client, UDP Server, UDP Client, H
TTP Client, M QTT Client
The single link placed by the TCP server supports 5 client
connections
TCP/UDP, M QTT , H TTP , IPv4, DHCP, DNS
Static IP (default) , DHCP
support
1 14.114.114.114 ( customizable )
Web page, parameter configuration tool, AT command
192.168.3.7 (customizable)
admin (customizable)
admin (customizable)
888 6 (customizable)
255.255.255.0 (customizable)
192.168.3.1 (customizable)
10k Byte or 1024 packets
Maximum 1024 Byte , 1~80 bytes idle time
6 00 ~4608 00 bps (default 115200)
NE2-S1/NE2-S1-TB User Manual
Description
9