2Network Cable Connection; Software Settings; 1Network Test Environment - Ebyte NE2-S1 Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

2.2.2Network cable connection

Use a standard RJ45 network cable, connect one end to the RJ45 interface of NE2-S1-TB, and
the other end to the computer or switch/router interface.

2.3Software settings

2.3.1Network test environment

This prevents customers from experiencing server search failures, inability to open web pages
and other related problems during actual applications. First check the relevant settings of the
computer.
（1） Turn off your computer's firewall and anti-virus software;
（2） Configure the network card connected to the device;
（3） This case is for the direct connection test of the device to the computer. The computer
needs to be configured with a static IP (the computer is directly connected to the serial server, there is
no router to allocate, and the computer cannot obtain the IP address). When using a switch or router,
you need to ensure that the device and the computer are on the same network ( For example: 1
92.168.3. xxx);
（4） Here, configure the static IP of the computer to 1 92.168.3. 4 (the same network segment
as the serial port server), configure the subnet mask to 2 55.255.255.0 , and configure the default
gateway to 1 92.168.3.1 ;
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
NE2-S1/NE2-S1-TB User Manual
4