2Default Parameters; 3Data Transmission Test - Ebyte NE2-S1 Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

2.3.2Default parameters

project
IP address
Default local port
subnet mask
Default gateway
Default working mode
Serial port baud rate
Serial port parameters

2.3.3Data transmission test

After going through the above steps, use the device's factory default parameters and perform the
following operations to achieve a transparent transmission test of data.
The steps are as follows:
（1） Open the test TCP/IP debugging assistant software.
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
Default parameters
192.168.3.7
888 6
255.255.255.0
192.168.3.1
TCP Server
115200
8/None/1
NE2-S1/NE2-S1-TB User Manual
5