Ebyte NE2-S1 Manual page 9

Chengdu Ebyte Electronic Technology Co., Ltd.
（2） In the "Network Settings" area, select the TCP client mode (TCP Client), the remote host
address corresponds (the device's default local IP: 192.168.3.7) , the remote host port corresponds to
the device's factory local port 888 6 , and click Connect.
（3） Wait for the computer to connect to the serial port server. After the connection is
completed, the LINK light of the serial port server is always on.
（4） Open the serial port assistant, set the serial port baud rate to 115200, and set the serial
port parameters to 1/8/None. Click to open the serial port.
（5） Data transmission test, the serial port assistant (serial port side) sends test data, and the
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
NE2-S1/NE2-S1-TB User Manual
6