Table of Contents
Advertisement
10 Maintenance
Cleaning
DANGER!
Follow the following instructions when
cleaning the projector:
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the projector.
Do not spray the projector with any
cleaning fluids.
Wipe over the surfaces gently. Be
careful that you do not scratch the
surfaces.
Cleaning the lens
Use a soft brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.
Update software
The latest software of the projector can be
found on www.philips.com/support for you
to get the best features and support from the
projector.
Before you update the software of the
projector, check the current software version.
•
From the home menu, select Settings, then
go to Option - Version.
CAUTION!
Do not turn off the projector or remove
the USB flash drive during the update.
Update software through
Internet
1
Connect the projector to the Internet.
2
From the home menu, select Settings.
3
Go to Option - Network Upgrade and press
OK. The projector will check if a new version
18
is available.
•
If a new version is found, the projector
will prompt you to start the update.
You can choose to start or cancel the
update.
4
Follow the on-screen instructions to
complete the update.
Update software through USB
CAUTION!
Do not turn off the projector or remove
the USB flash drive during the update.
1
Check the latest software version on www.
philips.com/support. Find your product
(model number: NeoPix 110 ), and locate
'Software and drivers'.
2
Download the update package and unzip it
if necessary.
Copy the file NPX110_Firmware.bin to the
root directory of the USB drive without
unzipping it further.
3
Connect the USB flash drive (FAT32
formatted) to the USB port on the projector.
4
Go to Settings - Option - Software Upgrade,
and press OK.
5
Follow the on-screen instructions to
complete the update.
Philips · NeoPix 110
Advertisement
Table of Contents
