Table of Contents
Advertisement
8 Maintenance
Cleaning
DANGER!
Follow the following instructions when
cleaning the projector:
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the projector.
Do not spray the projector with any
cleaning fluids.
Wipe over the surfaces gently. Be
careful that you do not scratch the
surfaces.
Cleaning the lens
Use a soft brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.
Update software
The latest software for the projector can be
found on
www.philips.com/support
to get the best features and support from the
projector.
Before you update the software of the
projector, check the current software version:
•
Press
on the remote control, select
Info , and then press the OK button �
OSD Language
Restore Factory Default
HDMI CEC
Panel Flip Rotation
Digital Zoom
Info
16
Update software through USB
1
Visit www.philips.com/support, find your
product (model number: NPX120/INT),
open its support page and locate "Software
& drivers".
2
Download the software installation file to
a USB flash drive. Unzip the downloaded
file and save the resulting file in the root
directory of the USB flash drive.
3
Turn off the projector and then connect the
USB flash drive to the projector.
4
Turn on the projector. The software update
will start automatically. The power LED on
the projector blinks during the update.
5
Wait for the update to complete. The
projector will turn off by itself after the
update.
6
Disconnect the USB flash drive from the
projector.
for you
English
0
0
CAUTION!
Do not turn off the projector or remove
the USB flash drive during a software
update.
Philips · NeoPix 120
Advertisement
Table of Contents
