Variation Send Level; Send Level - Yamaha MU15 Owner's Manual

RotarySp (Rotary Speaker), Tremolo, AutoPan,
Phaser1 - 2, Dist (Distortion), OverDrv (Overdrive),
AmpSim (Amp Simulator), 3BandEQ, 2BandEQ, AutoWah,
PitchCng (Pitch Change), Thru
Default: DelayLCR
This determines the Type of the Variation effect.
About "NoEffect" and "Thru"
When Variation Connection is set to "INS" and "NoEffect" is
selected, the sound for the Part is turned off (there is no "dry"
sound). When "Thru" is selected, you can hear the dry, unproc-
essed sound.
NOTE
• The 3BandEQ and 2BandEQ Types have little effect on the sound
unless the "hidden" parameters are changed via MIDI. (Page 91.)

Variation Send Level

Variation Send
Level setting
Selected
Part
Settings: off, on (when Variation Connection is set to "INS")
0 - 127 (when Variation Connection is set to "SYS")
Default: off (for "INS")
0 (for "SYS")
When the Variation Connection parameter (page 60) is set to "INS,"
this determines whether the Variation effect is applied to the se-
lected Part or not. Also, since the Variation effect cannot be used
simultaneously on several Parts (for "INS"), only the last Part for
which this parameter has been set to "on" will have the Variation
effect. A setting of "off" results in no Variation effect being applied.
E d i t M o d e
VarSend
Shows Variation
Send Level setting
for each Part.
61