Chorus Send Level; Variation Parameters; Send Level - Yamaha MU15 Owner's Manual

Chorus Send
Level setting
Selected
Part
Range: 0 - 127
Default: 0
This determines the level of the selected Part's Voice that is sent to
the Chorus effect. Each Part can be set independently for different
amounts of Chorus on each Voice. A value of "0" results in a
completely "dry" Voice sound (no Chorus effect).
NOTE
• Keep in mind that Chorus Type (page 58) must be set to something
other than "NoEffect" for this parameter to work as intended.
The Variation effects provide a wealth of additional tools for processing the
Voices of the MU15. It features most of the same effects found in the Reverb
and Chorus effects. This is not mere redundancy; it allows you to use two
types of Reverb or Chorus simultaneously on different Voices. For example,
you may want to have a Chorus effect on Voice and apply Flanger to another.
Variation also gives you many special effects not found in the other sections,
such as Delay, Gate Reverb, Rotary Speaker, and Wah.
Variation effects can be applied either to a single selected Part or to all Parts,
depending on the Variation Connection setting (page 60): Insertion or System.
For general information on using the Variation effect, see page 33.
E d i t M o d e

Chorus Send Level

ChoSend

Variation Parameters

Shows Chorus
Send Level setting
for each Part.
59