Yamaha MU15 Owner's Manual page 39

U s i n g t h e M U 1 5 w i t h a C o m p u t e r / S e q u e n c e r
• Connecting via a MIDI interface
MIDI
OUT
MIDI keyboard controller
MIDI
IN
GrandPno
MU15
NOTE
• For Windows 95/98 users: In order to use the TO HOST connection,
you'll need to install special MIDI driver software (YAMAHA CBX Driver
for Windows 95). You can obtain this driver from your local Yamaha
dealer, or download it via the Internet at:
http://www.yamaha.co.jp/english/xg/utility/tools.html
• If the MU15 is connected to a computer via the TO HOST terminal and
the power of the computer is turned off, an "IlglData" (Illegal Data)
error message appears, and the MU15 may not be operable. If this
happens, turn on your computer again. If this still doesn't resolve the
problem, turn all equipment off and then back on again.
• For Macintosh computers: You should set the MIDI interface clock
setting on the music software to 1 MHz.
• If you are using the MU15 to enter notes to the computer and wish to
hear what you are playing, you should set the music software to
"echo" the MIDI IN data to the MIDI OUT (on the computer). This is
usually done with a "MIDI Thru" or "MIDI Echo" option on the music
software.
Connecting to a Macintosh computer
(with MIDI interface)
MIDI
MIDI interface
IN
MIDI
OUT
Macintosh computer
Connecting to an IBM PC/AT compatible
computer (with MIDI interface)
MIDI
IN
MIDI
OUT
IBM-PC/AT or compatible
computer
MIDI
MIDI
39