Yamaha MU15 Owner's Manual page 66

• Saving and Restoring Data via MIDI
• Saving and Restoring Data via TO HOST
Operation
Z Make sure that the MU15 is properly connected to the
When using the MIDI terminals, connect the MIDI OUT of the MU15
to the MIDI IN of the data recorder. (See the "Saving and Restoring
Data via MIDI" illustration above.) Also, set the HOST SELECT
switch to MIDI.
When using the TO HOST terminal, make sure that the HOST
SELECT switch is set corresponding to the device to be used. (See
the "Saving and Restoring Data via TO HOST" illustration above.)
For more information on host computer connections, see page 37.
X Set the connected device to receive MIDI System Exclu-
Refer to the owner's manual of the particular device or software for
instructions on receiving System Exclusive data.
66
MU15
GrandPno
MU15
GrandPno
device and that the HOST SELECT switch is properly
set.
sive data.
E d i t M o d e
MIDI OUT
MIDI IN
Bulk Dump data can be sent and
received using the MIDI IN and
MIDI OUT connections.
TO HOST SERIAL PORT
Bulk Dump data can be sent and
received using the TO HOST
connection.
MIDI Data
Recorder
MIDI IN
MIDI OUT
COMPUTER/
MIDI Data Recorder