Dry Level - Yamaha MU15 Owner's Manual

When the Variation Connection parameter (page 60) is set to "SYS,"
this determines the level of the selected Part's Voice that is sent to
the Variation effect. In this case, each Part can be set independently
for different amounts of Variation on each Voice. A value of "0"
results in a completely "dry" Voice sound (no Variation effect).
NOTE
•
•
Range: 0 - 127
Default: 127
This determines the level or volume of the selected Part's "dry"
sound — the sound of the Voice without the effects. Dry Level gives
you additional fine control over the effect balance. Setting this to a
low value turns down the level of the "dry" sound and emphasizes
the effect sound.
NOTE
•
62
Keep in mind that Variation Type (page 60) must be set to something
other than "NoEffect" or "Thru" for this parameter to work as
intended.
If the Variation Type is set to "NoEffect" and Variation Connection is set
to "INS," there will be no sound for the Part. To remedy this, set the
Type to "Thru" or to one of the other effect Types. (Page 60.)

Dry Level

Dry Level

setting
Selected
Part
When Variation Connection is set to "INS," the Dry Level parameter is
automatically set to "off" and cannot be changed.
E d i t M o d e
DryLevel
Shows Dry Level
setting for each
Part.