Table of Contents
Advertisement
----~~----~---------------------------------------------
Data General Corporation (DGCl has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment and software. The drawings and specifications contained herein are the property of DGC and shall neither
be
reproduced in
whole or in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactur8d in accordance herewith.
5.14
SPINDLE MOTOR STARTER CAPACITOR REPLACEMENT (Capacitor (103-000387))
1.
Power down the drive and unplug the line cord.
Remove the bottom
cover of the drive {see 5.3}.
2.
Locate the starter motor capacitor {see Figure 5-23).
FS-05890
Figure 5-23.
Spindle Motor Starter Capacitor Replacement
3.
Loosen the capacitor bracket retaining screw.
4.
Pull the capacitor straight down and change the wires over to the
replacement capacitor.
5.
Position the capacitor back into the retaining bracket.
6.
Tighten the capacitor bracket retaining screw.
015-000133
5-26
•
•
•
Advertisement
Table of Contents
Troubleshooting
