Data General NOVA ECLIPSE 6234 Service Manual page 118

Data General Corporation (OGC) has prepared this manual for use by OGC personnel and customers as a guide to the proper installation, operation, and
maintenance of OGC equipment and software. The drawings and specifications contained herein are the property of OGC and .. shall neither be reproduced in
whole or in part without OGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
D
p
"ADR"R
K
=
c
Delete the break point if any.
Restart the execution of the program at location
pointed by 4A.
Start executing the program at "ADR" after an
IO-reset.
Kill the string typed so far. The ODT responds
with a
"?"
and the open cell is closed without
modification.
Print the octal value of the input only. This
will close any open cells without modification
and will not open a cell.
Core dump, user is asked for starting/ending
addresses. Dump will also go to printer if SWREG
bit 5 is on.
NOTE
In programs which relocate themselves the user should
place break points only in the original program area.
If a break point is placed outside this area the results
will be unpredictable.
015-000133
4-74
•
•
•