•
•
>
•
5.
Unscrew and remove the three screws that hold the blower cover to
the base plate and remove the cover.
Now pull the blower wheel
off of the motor shaft (see Figure 5-7).
6.
Unscrew the four screws that hold the base plate of the blower
assembly to the motor, and remove the base plate (see Figure
5-7) •
FS-05876
BLOWER
WHEEL
SCREW
MOTOR
SHAFT
MOTOR
Figure 5-7.
Blower Assembly (Exploded View)
7.
Unpiug the connector at J3 on the ac power pCB (see Figure 5-8)
and disconnect the two wires connected to the capacitor •
015-000133
5-9