Yamaha GW10 Owner's Manual page 9

q INPUT PEAK LED
For monitoring of the input signal level. (This lights intermittently at
optimum level; see page 14.)
w MEMORY/TUNER Indicator
Displays the program number. (See page 10.) During Tuner operation,
this displays the name of the note or string played. (See page 41.)
e BANK LEDs / Sharp (¶) LED
Bank LEDs
The two LEDs (green and red) indicate which of the four banks of
programs is selected. (See page 10.)
Sharp LED
Bank LEDs
Sharp LED
The top LED also serves as a sharp indicator during Tuner operation
(functioning along with the note name shown in the MEMORY/
TUNER indicator), lighting in the case of an accidental. (See page
10.)
r ON OFF GROUP / TUNER Indicators
These LEDs serve two purposes:
• As ON OFF GROUP indicators, they correspond to the Effect Block
buttons directly below them and light to indicate which effect blocks
can be turned on and off with the Foot Controller. (See pages 19,
35.)
• As TUNER indicators (during Tuner operation), they show whether
the input signal is in tune or not; when all three indicators light
simultaneously, the signal is in tune. (See page 41.)
t WRITE, COPY, SWAP LEDs
These LEDs serve two purposes:
• As WRITE/COPY/SWAP indicators, they flash when the respective
Write, Copy, or Swap operation is active. (See pages 37–39.)
• In normal operation, these are effect block indicators, and correspond
to the Effect Block buttons directly below them and light to indicate
which effect blocks are on. (See page 18.)
y Effect Block / Group Set / Utility Buttons
These buttons serve three purposes:
• In normal operation, they correspond to the three effect blocks
(Distortion, Chorus, and Delay) and are used to turn those effect
blocks on and off. (See pages 18, 24.)
• Also, in normal operation, they are used to set the on/off group for
the effect blocks (which effect blocks will be turned on/off by press-
ing the Foot Controller). (See page 25.)
• In Write, Copy, and Swap operations, they are used to select the
respective utility operation. (See pages 37–39.)
A=44
Hz
Effect program number
BANK
MEMORY / TUNER
5