Yamaha GW10 Owner's Manual page 3

Congratulations and thank you for purchasing the Yamaha GW10
Guitar Performance Effector. The GW10 is a portable and conven-
ient multi-effect device for guitar (as well as other instruments).
The high-quality effect sound and the flexible pedal control over
certain parameters make the GW10 ideal for signal processing in
home recording, studio, and live performance applications.
Some of the advanced features of the GW10 include:
• Three basic effect blocks, featuring Distortion, Chorus and Delay.
• Additional effect types within each block, such as Compressor,
Overdrive, Crunch, Wah, Amp Simulator, Equalizer and Pitch Shifter
— plus a built-in Noise Gate.
• High-quality sound in all effects, plus added benefit of having all
effects integrated into one unit.
• Convenient parameter control over all effects, yet exceptional ease-
of-use — you can adjust the parameters of the effect blocks much as
you would on conventional pedal effects.
• Built-in Foot Controller, which not only allows for easy volume
adjustment, but gives you realtime control over one of various effect
parameters. It also features a switch (past the maximum point) for
instantly turning selected effects on and off.
• User memory for storing up to 20 effect programs, selectable with
the Pedal Switch.
• Built-in tuner, allowing you to tune your instrument without remov-
ing it from the signal chain.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
IMPORTANT: THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH
THE FOLLOWING CODE:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with
the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with
the letter L or coloured RED. Making sure that neither core is connected to the earth
terminal of the three pin plug.
Connecting the Plug and Cord
(YAMAHA PA-3 AC adaptor)