Swapping One Effect Program With Another - Yamaha GW10 Owner's Manual

Swapping One Effect Program with Another

The Swap operation simply exchanges two
selected programs, swapping the data of one
program number for that of the other.
Before swapping:
BANK # 1
PROGRAM # 1
A
After swapping:
BANK # 1
PROGRAM # 1
B
OPERATION
1
Select a bank number and program number
with the M Pedal Switch. (See
pages 10–11.)
2
Simultaneously hold down the B(NO)
button and press T(YES). (The
MEMORY/TUNER indicator, BANK LEDs
and WRITE LED all flash.)
3
4
BANK # 1
PROGRAM # 2
B
5
BANK # 1
PROGRAM # 2
A
Press the S button. (The SWAP LED
will now flash.)
Select the other program number (and bank
number, if desired) with the M
Pedal Switch.
The T (YES) button CANNOT be
NOTE
used here to change the effect program
number; its only use is in step #5 below.
To actually swap the two programs, press
T(YES). To cancel the operation, press
B(NO).
Pressing B(NO) returns to the previ-
ously selected program. If you were previ-
ously editing a program, the edited settings
have been stored temporarily. Pressing
T(YES) executes the swap operation
and erases the settings stored in the edit
buffer. If you wish to retain these settings,
use the Write operation (page 37) to save the
settings to an effect program number, before
executing the Swap operation.
39
Reference