Reference; Selecting Effect Programs; Turning Effect Blocks On And Off; Using The Panel Buttons To Turn Effect Blocks On And Off - Yamaha GW10 Owner's Manual

OPERATION
1
To select one of the four banks, press and
hold the M Pedal Switch, then
release it when the desired bank number is
shown in the BANK LEDs.
2
Press the Pedal Switch (or the T(YES)
button) once to advance to the next effect
program number. The current effect program

TURNING EFFECT BLOCKS ON AND OFF

Using the Panel Buttons to Turn Effect Blocks On and Off

OPERATION
Press the Effect Block button (D, H, or
L) corresponding to the effect block you wish
to turn on or off. The button's red LED is lit
when the effect block is on, and goes out when
the block is turned off.
24

Reference

Reference
This section of the manual explains briefly, yet completely, all of the features
and functions of the GW10. Refer to it when you need information about a
specific feature or function.

SELECTING EFFECT PROGRAMS

You can change the sound of an effect program by turning any of its three effect
blocks on or off. This can be done either by using the panel buttons or the Foot
Controller.
number is shown in the MEMORY/TUNER
indicator.
(For more information on the bank/program
configuration of the GW10 and the selection of
effect programs, see pages 10–11 in SYSTEM
OVERVIEW.)