Table of Contents
Advertisement
CLEAN WITH A SOFT, DRY CLOTH
Never use solvents such as benzine or thinner to clean the unit, since these
will damage the finish. Wipe clean with a soft, dry cloth. If necessary,
use a soft, clean cloth slightly moistened only with water — making sure
to wipe the case off again with a dry cloth.
FOOT CONTROLLER
Do not put your fingers underneath or inside the Foot Controller pedal,
since some of the parts there have a lubricant or grease applied to them.
Doing so may not only get your hands dirty, but also remove some of the
grease necessary for smooth pedal operation.
ELECTRICAL INTERFERENCE
Since the GW10 contains digital circuitry, it may cause interference and
noise if placed too close to TV sets, radios or similar equipment. If such a
problem occurs, move the GW10 further away from the affected equip-
ment.
3
Hide quick links:
Advertisement
Table of Contents
