Var Pan; Var Return; Sendvar Rev; Ins - Yamaha FS1R Owner's Manual

Var Pan

Variation Pan
Settings: L63 ... C ... R63
Sets the pan position of the variation effect sound - i.e. the perceived position of the variation effect sound within the
stereo sound field. A setting of "L63" sets the variation sound full left, "R63" sets the sound full right, and "C" places
the sound in the center. Intermediate settings pan the variation effect sound to corresponding positions in the stereo
sound field.

Var Return

Reverb Return Level
Settings: 0 ... 127
This parameter duplicates the PLAY mode Var Rtn parameter (page 24), adjusting the level of the signal returned
from the FS1R Variation effect stage. The higher the value, the higher the level of the variation signal.

SendVar Rev

Variation-to-Reverb Send Level
Settings: 0 ... 127
Sets the amount of signal sent from the output of the variation effect stage back to the input of the reverb effect
stage (see diagram on page 13). The higher the value, the more variation signal is sent to the reverb stage.

Ins

The Insertion stage includes a range of effects which can be directly inserted in the part signal path (see diagram
on page 13).

Type

Insertion Effect Type
Settings: Thru, Chorus, Celeste, Flanger, Symphonic, Phaser1, Phaser2, Pitch Chng, Ens Detune, Rotary SP,
2WayRotary, Tremolo, Auto Pan, Ambience, A-Wah+Dist, A-Wah+Odrv, T-Wah+Dist, T-Wah+Odrv,
Wah+DS+Dly, Wah+OD+Dly, Lo-Fi, 3-Band EQ, HM Enhncer, Noise Gate, Compressor, Comp+Dist,
Cmp+DS+Dly, Cmp+OD+Dly, Distortion, Dist+Delay, Overdrive, Odrv+Delay, Amp Sim, Delay LCR, Delay LR,
Echo, CrossDelay, ER 1, ER 2, Gate Rev, Revrs Gate
Selects the Insertion effect type, or "Thru" if no insertion effect is required. Refer to the separate "Data List" booklet
for brief descriptions of each of the Insertion effect types.

Type-Specific Insertion Parameters

See separate "Data List" Booklet
Each of the insertion effect types, selected via the "Type" parameter, above, has a different set of parameters that
specify the actual insertion effect sound. Refer to the separate "Data List" booklet for information on the individual
parameters for each insertion effect type.

Ins Pan

Insertion Pan
Settings: L63 ... C ... R63
Sets the pan position of the insertion effect sound - i.e. the perceived position of the insertion effect sound within the
stereo sound field. A setting of "L63" sets the insertion sound full left, "R63" sets the sound full right, and "C" places
the sound in the center. Intermediate settings pan the insertion effect sound to corresponding positions in the stereo
sound field.
47