Store Performance; Recall Performance - Yamaha FS1R Owner's Manual

STORE PERFORMANCE

Once you've created a new performance setup by using the parameters in the PLAY mode, the EDIT
[PERFORMANCE] mode, and/or the EDIT [EFFECT] mode, it's necessary to store the setup to one of the internal
memory locations otherwise the edited data will be lost when a new performance setup is selected.
n
Any previous data in the memory location to which the new data is stored will be erased. If you want to keep the previous data, save it to
an external MIDI data storage device via the UTILITY mode DUMPOUT function (page 77).
n
STORE PERFORMANCE should be executed after storing edited voice data using the STORE VOICE function (page 70).
When the STORE function is selected, "Store Perform" will appear at the top of the display along with the flashing
number of the currently selected internal performance number. Use the VALUE [
number of the internal memory location you want to store the edited performance setup to (I001" through "I128").
When the destination performance number has been selected, press the [ENTER] button. "Are you sure?" will
appear on the display. Press the [ENTER] button again to actually store the performance setup, or [EXIT] to cancel.
"Executing" will appear on the display briefly while the data is being stored, then the FS1R will return to the EDIT
[PERFORMANCE] mode menu.

RECALL PERFORMANCE

If you do accidentally select a different performance setup, execute the UTILITY mode INITIAL/Perform function, or
receive bulk performance data prior to storing an edited setup, it is possible to recall the most recent edit by using
the RECALL PERFORMANCE function.
When the RECALL function is selected, "Recall Edit Perf" and "Are you sure?" will appear on the display. Press the
[ENTER] button to recall the edited data, or [EXIT] to cancel. "Executing" will appear on the display briefly while the
data is being recalled, then the FS1R will return to the EDIT [PERFORMANCE] mode menu.
44
] and [ ] buttons to select the