Rcv Ch (Receive Channel); Rcv Max (Maximum Receive Channel: Parts 1 & 2 Only); (Bank); (Program Number) - Yamaha FS1R Owner's Manual

In either case the part to be edited - 01 through 04 - can be selected via the PART [
selected part number appears above "PART" in the lower left corner of the display). The various parameters are
selected via the CURSOR [
upper right corner of the display, and the solid triangular pointer indicates which of the parameters is selected. A
small triangular pointer appears above the icon corresponding to the selected parameter in the bottom line of the
display. Once the desired parameter has been selected, it's value can be set as required via the VALUE [
[ ] buttons.

Rcv Ch (Receive Channel)

Rcv Max (Maximum Receive Channel: parts 1 & 2 only)
Settings: of (off), 01 ... 016, pf (performance)
These two parameters function together, and thus will be described together. The Rcv Ch and Rcv Max parameters
specify a single channel, or a range of channels, via which MIDI data will be received by the currently selected part.
When the Rcv Ch parameter is selected (a triangular pointer appears to the left of the leftmost number), the VALUE
[ ] and [ ] buttons set both the left and right channel numbers simultaneously. In this case, MIDI data will only be
received via the single specified channel. When the Rcv Max parameter is selected (the triangular pointer appears
to the left of the rightmost number), the VALUE [
setting of the rightmost channel number, and MIDI data will be received on all channels ranging from the Rch Ch to
the Max Ch numbers. Please note that the Rcv Max parameter is only available for parts 1 and 2.
When "pf" is selected, the Rcv Ch refers to the Perf Ch (page 23).
n
When a range of receive channels is specified (i.e. the Rcv Ch and Rcv Max numbers are different), an "M" will appear before the MIDI
channel number on the lower line of the display when the corresponding part is selected.
n
When "pf" is selected and Perf Ch (page 23) is set to "off", no MIDI data is received.

(Bank)

Settings: Off, Int, PrA ... PrK
This parameter refers to the bank containing the selected voice in the PART ASSIGN mode. When "Off" no voice is
assigned to the selected part. "Int" is the Internal voice bank which can be used to save original edited voices, and
PrA and PrB are the normal preset banks. The PrC through PrK banks contain an extensive range of FM voices
originally provided in the DX-series synthesizers (a complete list is provided in the separate "Data List" booklet).

(Program Number)

Settings: 001 ... 128
This parameter refers to the selected voice in the PART ASSIGN mode. All banks have voice numbers from "001" to
"128".

Volume

Settings: 000 ... 127
Sets the volume of the current voice. The higher the value the louder the volume.

Pan

Settings: rdm, L63 ... C ... R63
Sets the pan position of the current voice - i.e. the position of the voice between left and right in the stereo sound
field. A setting of "L63: sets the pan position full left, "Cnt" sets the pan at center, and "R63" sets the pan full right. In
between settings produce corresponding intermediate pan positions. The "rdm" setting produces a random pan
position which changes with each note played.
n
This parameter is the same as the EDIT [PERFORM] mode PART/Others/Pan parameter.
] and [ ] buttons. The name of the currently selected parameter appears in the
] and [ ] buttons can only be used to increment (increase) the
25
] and [ ] buttons (the
] and