Reverb + Auto Pan (Rev + Pan); Common Parameters - Yamaha ProR3 Owner's Manual

Reverb + Auto Pan (Rev + PAN)

Common parameters

Downloaded from: http://www.usersmanualguide.com/
Key Parameter
MAIN
REV RevTime 0.3 ~ 99.0 s
REV IniDelay 0.1 ~ 200.0 ms
REV HighRatio X0.1 ~ X1.0
REV LowRatio X0.1 ~ X2.4
REV Diffusion 0 ~ 10
PAN Speed 0.05 ~ 40.00 Hz
PAN Depth 0 ~ 100%
L→R, L←R, L ↔R
PAN Direction
FINE
PAN/REV Balance *1 0/100 ~ 100/0
REV Rev Mix *2 0 ~ 100%
REV Reverb Type *3
REV Density 0 ~ 100
REV HPF Thru, 40 Hz ~ 1.0 kHz
REV LPF 400 Hz ~ 20 kHz, Thru
REV Space Mod 0 ~ 10
REV Patch *4
Common parameters Refer to "Common parameters" on page 27
*1 Only when REV Patch is parallel (Reverb + PAN)
*2 Only when REV Patch is serial (Reverb → PAN, PAN → Reverb)
*3 Hall, Room, Vocal, Plate
*4 Reverb + PAN, PAN → Reverb, Reverb → PAN
Key Parameter
FINE
1stRef-1 Delay 0.1 ~ 200.0 ms
1stRef-1 Lvl 0 ~ 100%
1stRef-1 Pan L16 ~ R16
1stRef-2 Delay 0.1 ~ 200.0 ms
1stRef-2 Lvl 0 ~ 100%
1stRef-2 Pan L16 ~ R16
Input Mix *1 0 ~ 100%
continues to DFL
*1 Only for stereo mode
Advanced uses (2) – Editing functions –
Value
Refer to "Reverberation" items on page 18
Modulation frequency of auto-pan
Modulation depth of auto-pan
Direction of panning movement
Level balance of reverb and auto-pan
Reverb amount
Type of reverb tone
Density of reverb
Cutoff frequency of reverb high pass filter
Cutoff frequency of reverb low pass filter
Modulation level of reverb
Connection of auto-pan and reverb
Value
Delay time of reflection 1
Level of reflection 1
Pan position of reflection 1
Delay time of reflection 2
Level of reflection 2
Pan position of reflection 2
Stereo-mix adjustment
Description
Description
ProR3 Digital Reverberator
27