Camera User Manual
Parameter
Manufacturer
Name
Hardware
Version
Firmware
Version
Uboot version
Kernel version
Video
Channel(s)
Channel
Quantity
Alarm Input
Quantity
Alarm Output
Quantity
Serial Port
Quantity
Network card
Quantity
Step 3 Click
.
If the message "Apply success!" is displayed, click OK. The system saves the settings.
If the message "Apply failed!" is displayed, you must apply for the Parameter Configure
permission from an administrator. For details, see 14.1 Configure a User.
----End
Video and Audio Stream
Procedure
Step 1 Click Configuration > Stream > Base Stream.
The Stream Configuration page is displayed, as shown in Figure 4-2.
Issue V1.0 (2023-02-10)
Description
Setting
Configure the Device
41