9.2.2
Adding An XLS, Desigo Modular, or Cerberus Pro Modular
To add an XLS, Desigo Fire Safety Modular, or Cerberus PRO Modular node, complete the following
steps (refer to Figure 6-27):
Type in the Node number to match the Node number from the Zeus configuration.
•
Add a Node Name.
•
Choose XLS as the Node Type.
•
Choose the Node numbers of the NCC as the Default NCC-G Control Setting.
•
Click Save.
•
Figure 9–7: Adding An XLS/Desigo Modular/Cerberus Pro Modular Node
Siemens Industry, Inc.
Smart Infrastructure
42
A6V12198161_en--_a