Adding An Xls - Siemens Scalance X204-2 Multimode Installation Instructions Manual

Adding An XLS

Siemens Industry, Inc.
Building Technologies Division
Figure 35
Adding An NCC Node
To add an XLS node, complete the following steps (refer to Figure 36):
• Type in the Node number to match the Node number from the Zeus
configuration.
• Add a Node Name.
• Choose "XLS" as the Node Type.
• Choose the Node numbers of the NCC as the Default NCC-G Control
Setting.
• Click the Save button.
27 P/N 315-050537-3