Terminal Assignment, Proline 800 - Advanced - Endress+Hauser Proline Promag W 800 Operating Instructions Manual

Proline Promag W 800
Endress+Hauser
7.2.4

Terminal assignment, Proline 800 - Advanced

Transmitter
Connection methods available
Power
Outputs
supply
Terminals Terminals
Supply voltage
Order code for Terminal numbers
"Power supply"
Option K, S 1 (L+/L), 2 (L-/N)
Order code for "Output" Terminal numbers
and "Input"
Option I, K, M, N, P
If a status input is also connected, the following terminals must be assigned, which are
located on the second terminal block of the IO board:
Order code for "Output" and "Input"
Option I, M, P
Possible options for order code
"Electrical connection"
• Option A: coupling M20x1
• Option B: thread M20x1
• Option C: thread G ½"
• Option D: thread NPT ½"
Terminal voltage
DC 24 V
AC 100 to 240 V
20 21
Pulse-/ Pulse-/
switch output 2 switch output 3
Terminal numbers
24
Positive terminal status input
Electrical connection
Frequency range
–20 to +25 % –
–15 to +10 % 50/60 Hz, ±3 Hz
22
Pulse-/ Common
switch output 1 reference
potential (COM)
25
Negative terminal status input
23
47