Terminal Assignment; Device Plugs Available; Pin Assignment Of Device Plug; Preparing The Measuring Device - Endress+Hauser Proline Promass X 300 PROFINET Operating Instructions Manual

Proline Promass X 300 PROFINET
Endress+Hauser
7.1.3

Terminal assignment

Transmitter: supply voltage, input/outputs
The terminal assignment of the inputs and outputs depends on the individual order
version of the device. The device-specific terminal assignment is documented on an
adhesive label in the terminal cover.
Supply voltage
1 (+) 2 (–)
Terminal assignment of the remote display and operating module →  40.
7.1.4

Device plugs available

Device plugs may not be used in hazardous areas!
Order code for "Input; output 1", option RA "PROFINET"
Order code for
"Electrical connection"
L, N, P, U
1) 2) 1) 2) 1) 2) 1) 2)
R , S , T , V
1) Cannot be combined with an external WLAN antenna (order code for "Enclosed accessories", option P8) of
an RJ45 M12 adapter for the service interface (order code for "Accessories mounted", option NB) or of the
remote display and operating module DKX001.
2) Suitable for integrating the device in a ring topology.
7.1.5

Pin assignment of device plug

Pin
2
1
2
1 3
3
4
4
Coding
A0032047
7.1.6

Preparing the measuring device

NOTICE
Insufficient sealing of the housing!
Operational reliability of the measuring device could be compromised.
‣
Use suitable cable glands corresponding to the degree of protection.
1. Remove dummy plug if present.
Input/output 1 Input/output 2
PROFINET 24 (+)
(RJ45 connector)
Device-specific terminal assignment: adhesive label in
Cable entry/connection
2
Connector M12 × 1
Connector M12 × 1
+
+
-
-
D
Electrical connection
Input/output 3
25 (–) 22 (+)
terminal cover.
3
–
Connector M12 × 1
Assignment
TD +
RD +
TD –
RD –
Plug/socket
Socket
23 (–)
33